Exit sign is powered from pendant cable (no extra wiring)
6 years design life at max. ambient
High Quality Lithium battery (LiFePO4) and smart charger
Single Point Unit (SPU)
Fully compliant (AS/NZS 2293)
MECHANICAL
Adjustability
Fixed
Body Material
Polycarbonate
Diffuser Material
PMMA
Fitting Colour
White
Installation Type
Suspended
IP Rating
IP20
ELECTRICAL
Electrical Rating
Class II
Input Current
0.03 A
Input Frequency
50 Hz
Input voltage
230V~
Maximum Wattage
2.6 W
Standby Power
2.3 W
Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge.
Switch Type
Inline
Working Temp Range
0 to 45 °C
LAMP
CCT Configuration
Single
CRI
>80
Lamp/LED Current
110 mA
Lamp/LED voltage
9 V
COLOUR TEMPERATURE
CCT
6000K
DRIVER
Dimmable
No
Driver Included
Yes
Integrated Driver
Yes
Driver Type
Fixed output
Wiring Type
Re-wireable terminal block (2 pin)
EMERGENCY (EM SUFFIX)
Replacement Battery Code
13972
Emergency Classification
C0:E4, C90:E4
Decal Size
300 x 150 mm
Emergency Duration
90 mins
Emergency Lumen Output
60 lm
Emergency Mode
Maintained
Emergency Output Power
1000 mW
Viewing Distance
24 m
COMPLIANCE
Product Design Life
6 years
The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use.